1.重量輕；鋁的密度為2.73g/m3,只有鋼的1/3。
1. light weight; aluminum density is 2.73g/m3, only steel 1/3.
2.強度高；通過成份配置、加工和熱處理方法可以達到很高的強度。
2., high strength; high strength can be achieved through component configuration, processing and heat treatment.
3.耐腐蝕；具有自我防銹能力，形成的氧化層，可防止金屬氧化銹蝕，耐酸堿性好。
3., corrosion resistance. The oxide layer with self rust resistance can prevent oxidation and rust of metals, and is good for acid and alkali resistance.
4.安裝方便；鋁金屬可以鉚接、焊接、膠粘等多種方式連接。
4., installation is convenient; aluminum metal can be riveted, welded, glued and other ways.
5.環保，可循環回收利用。
5. environmental protection, recyclable recycling.

鋁鎂錳板的種類：A、原色錘紋 Stucco（無規則壓紋）、Emboss（規則壓紋）
The types of aluminum, magnesium and manganese plates are A, primary color hammer, Stucco (irregular grain), Emboss (regular embossing).
錘紋的主要目的： 1、增加鋁鎂錳板剛度；
The main purpose of hammer stripe is as follows: 1, increase the stiffness of Al Mg Mn board.
2、防止光污染；
2, to prevent light pollution;
3、更加均勻的氧化。
3, more uniform oxidation.
B、烤漆涂層 （PVDF、PVF2、PE）；屋面及外墻用鋁鎂錳合金一般采用預滾涂（Coil Coated）工藝，具有色差控制好、漆膜均勻、質量穩定性高、環保等點。涂層種類一般選用含氟碳樹脂70%以上的PVDF氟碳漆。
B, lacquer coating (PVDF, PVF2, PE); aluminum and magnesium manganese alloy in roof and exterior wall generally use Coil Coated technology, with good color difference control, uniform paint film, high quality stability, environmental protection and so on. The type of coating is generally PVDF fluorocarbon paint containing fluorocarbon resin more than 70%.
通過本文的介紹，相信大家對于鋁板生產廠家http://m.guangshe.com.cn有了一定的了解，如果想了解其他相關的知識，請跟我們聯系！
Through the introduction of this article, I believe that you have a certain understanding of the aluminum manufacturer http://m.guangshe.com.cn, if you want to know the other relevant knowledge, please contact us!